 |
- Aluminum body
- Weatherproof switcher
- LED power indicator with 3-level warning
- Equipped with rechargeable lithium-ion battery
- Battery itself is the grip
- Chargeable indoors or in vehicle
- With 3 light filters for different lighting purposes
- Most effective light transmission
- Bulb life is 10 times longer than halogen
- Truer color fidelity - approximates the color temp of the sun
- 24W HID bulb reach 1750 Lm and equal to 100W halogen bulb
|
 |
Parts in a Regular kit |
 |
| |
1. Must use the adaptor and charger which authorize by BRIGHTSTAR and follow the rules lists on user guide for charging. Do not use the other supplier's adaptor (charger) for recharging.
2. If consumers use the other supplier's adaptor (charger) to recharge the battery or to modify the protection-cheap and circuit of battery that lead to any accidents or damages, BRIGHTSTAR will not take charge of these results. |
|
|
Comparison |
|
| Other competitor |
Dipper II |
| PL: The diameter of grip (56mm) is too big to grab. |
Dipper II: Battery itself is the grip. And it is easy to grab the torch as the smaller diameter (43mm). |
| PL: The bottom (A part) is made by plastic will lead to dull the plastic screw thread quick while screw the plastic bottom with metal body. And it is easier to break while falling down on the ground. Besides, the B part is not tight enough that it would leak water into. |
Dipper II: It is durable due to the whole aluminum alloy materials. The switch (C part) is complied with industrial standard which is tested to press over 10000 times, and meet with weatherproof and dust resistance approval. |
PL: Can not show up the remaining power. It needs four steps to replace battery which waste time and might put the battery on wrong direction in the dark.
 |
Dipper II: The new design of LED power indicator (D part) can reveal the remaining power, no matter the battery connect to light part or not. Replacing battery only need two step which save your time.
 |
| PL: The charger socket (E part) is weak at making resistant to water, bad weather and dust. |
Dipper II: Due to make by aluminum alloy, the grip (battery part) and light part (F part) are firm and solid, which can connect closely. In addition, putting an O-ring also has it better at weatherproof and resist dust.
 |
| - |
Dipper II: We add two strap holes on the bottom in order to carry it by various ways. |
| - |
Dipper II: The battery (grip) can switch to 12W Dipper II Junior's light head. |
|
|
Shooting Distance |
|
|
Carrying Mode |
|
A. Hand carry.
B. Carry with shoulder strap in horizontal type.
C. Carry with shoulder strap in vertical type.
D. Carrying with shoulder strap, you can add a fall arrest lanyard.
(Lanyard is not in the standard kit.) |
|
Optional Case |
|
|
LED indicator |
|
Battery level visible by itself
with a 3-color LED indicator
No need to combine with light part, you can switch on the power to check the color of LED light for the remaining power. |
 |
|
How to Charge the Battery? |
|
|
How to Switch Filter? |
|
| 1. Release filter can by turning anti-clockwise from light |
|
2. Put in filter |
|
3. Lock the cap back by turning clockwise |
|
Light Filter Image |
|
|
With Light Filters |
|
 |
1.Diffusion ( widen beam angle, change from spot to flood )
2.Yellow ( better visibility when foggy )
3.Blue ( raise Kelvin rating when necessary ) |
Filter Material:
With high - quality LEEFilter , made in England, originally applied to 1000W halogen bulbs , heat - resistant . |
Filter Ring:
Easy to put on and take off |
|
Regular Kit Packing |
|
|
Model No. |
|
| ORDER CODE |
| 21W / 4400 mA |
F20121061 |
| 24W / 5200 mA |
F20124063 |
|
Options |
|
| ORDER CODE |
 |
Carrying Case |
2B3008000 |
 |
12W HID Light Head |
3B3003000 |
 |
4.4A Spare Battery ( with battery belt bag ) |
3B3000000 |
| 5.2A Spare Battery ( with battery belt bag ) |
3B3000010 |
|
Specifications & Features |
|
| Size |
L33.5cm*Ø7.2cm*Ø4.3cm |
Bulb Type |
21/24W HID |
| Run Time |
24W With 5.2A : around 135 mins
21W With 4.4A : around 135 mins |
| Bulb Life |
over 750 hrs |
| Light Output |
24W : 1750 Lm
21W : 1300 Lm |
| Color Temperature |
7000K |
#Battery |
Quality Rechargeable Li-ion Battery with over 500 Charging Cycles |
| Weight |
light part: 700g
with battery: 1150g |
Shooting Distance |
1000m |
# Battery Notice
- The life time of Li-ion battery is 24 months. When using after 18 months you should replace a new battery.
- When using battery, battery capacity will decrease due to the increase of charging times. That means the running time of torch is shortened.
- After using torch, please full charge the battery in order to prolong the life time of battery.
- If you charge battery entirely and place it for over 45 days, you should recharge the battery immediately.
- When after using the torch without fully recharged, it will damage the battery. Fully recharging the battery and placing it for over 60 days will have the same result. For example, the battery can not be fully charged or become a dead one.
|
Warranty Terms |
|
- Bulb: 90 days (starting from delivery date)
- Inverter(Ballast): 180 days (starting from delivery date)
- Battery, Charger & Adapter: 180 days (starting from delivery date)
- Other problems resulting from mal-production have to be reported within 15 days after goods arrival
- If product is damaged due to human errors or improper use, warranty becomes invalid
|
|
